ANSYS Course ~ Drone Performance Analysis with Propeller Shape Variation
10-session course syllabus (1.5 hours each) with topic: "Drone Performance Analysis with Propeller Shape Variation Using CFD (ANSYS Fluent)". This syllabus is progressive: starting from CFD fundamentals → ANSYS practice → through to drone propeller analysis.
ANSYS CFD Course Syllabus: Drone Performance Analysis with Propeller Shape Variation
Session 1 – Introduction to CFD & Drone Aerodynamics
-
Fundamental CFD concepts: conservation of mass, momentum, energy.
-
Role of CFD in drone aerodynamic design.
-
Propeller characteristics: pitch, diameter, chord, airfoil.
-
Research case study of drone propellers.
Session 2 – Introduction to ANSYS Workbench & Fluent
-
ANSYS Workbench structure.
-
Main modules: Geometry, Meshing, Fluent.
-
Basic CFD analysis workflow in ANSYS.
-
Fluent interface: solver, boundary conditions, physical models.
Session 3 – Propeller Geometry Design
-
Creation of 3D propeller models with shape variations (NACA airfoil, twisted blade, straight blade).
-
Geometry export from CAD to ANSYS.
-
Preparation of flow domain for simulation.
Session 4 – Propeller Geometry Meshing
-
Meshing concepts: structured vs unstructured.
-
Refinement at blade tip & root.
-
Prism layer to capture boundary layer.
-
Mesh quality criteria (skewness, aspect ratio).
Session 5 – Simulation Setup in Fluent
-
Solver selection (pressure-based, steady vs transient).
-
Material definition (air, properties).
-
Boundary conditions: velocity inlet, pressure outlet, wall.
-
Initialization & solution methods (SIMPLE, coupled).
Session 6 – Turbulence & Rotating Reference Frame
-
Review of turbulence models (k-ε, k-ω SST, LES).
-
Concept of rotating reference frame (RRF) for propellers.
-
Definition of propeller rotation speed (RPM).
-
Implementation of RRF in Fluent.



