ANSYS Course ~ Football Aerodynamics Study with Speed Variations
10-session course syllabus @1.5 hours for the topic: "Football Aerodynamics Study with Speed and Rotation Variations Using ANSYS Fluent". This structure contains progressive design: starting from basic CFD concepts, football aerodynamics theory, model creation, to simulation results analysis.
ANSYS Fluent Course Syllabus – Football Aerodynamics Study
Duration: 10 sessions × 1.5 hours (total 15 hours) Method: Brief theory (30%) + Simulation practice (70%) Software: ANSYS Workbench, ANSYS Fluent
Session 1 – Introduction to CFD and Football Aerodynamics
-
Basic CFD concepts (Continuity, Momentum, Navier-Stokes).
-
Aerodynamics principles on a ball (drag, lift, magnus effect).
-
Case study of knuckleball phenomena and curving shots.
-
Discussion of important parameters: flow velocity, spin rate, and Reynolds number.
Session 2 – Introduction to ANSYS Workbench & Fluent
-
Workbench navigation & Fluent modules.
-
Workflow structure (Geometry → Mesh → Setup → Solution → Results).
-
Solver selection (pressure-based vs density-based).
-
Introduction to boundary conditions for aerodynamics studies.
Session 3 – Football Geometry Creation
-
Creating a simple ball model (sphere) in DesignModeler / SpaceClaim.
-
Adding ball panel details (optional for advanced).
-
Determining fluid domain (cylindrical flow domain).
-
Exporting geometry to ANSYS Meshing.
Session 4 – Mesh Creation
-
Mesh types (tetrahedral, hexahedral, polyhedral).
-
Inflation layer to capture boundary layer.
-
Mesh quality criteria (skewness, orthogonal quality, aspect ratio).
-
Mesh independence test (concept and simple practice).
Session 5 – Simulation Setup Without Rotation (Baseline Case)
-
Boundary condition definition (velocity inlet, pressure outlet, wall).
-
Turbulence model selection (k-ε Realizable, k-ω SST).
-
Solver parameters (steady vs transient).



