Panel Plate Vibration Modes

Mode shapes and natural frequencies of a thin plate with edge supports

Category: Modal Analysis & Natural FrequenciesComplexity: Simple

0 views

A modal analysis of a thin plate or panel under different edge support conditions. The results show which modes vibrate easily, so plate thickness, stiffeners, or bolt positions can be adjusted.

Panel Plate Vibration Modes: report page 1 (Mode shapes and response)

Project info

CategoryModal Analysis & Natural Frequencies
ComplexitySimple
Image sets2 pages
Estimated build time± 6 working days
SoftwareANSYS Fluent / CFX
PriceUS$219 - US$844

Deliverables

Workbench project file and the shell model
Mode shape images and a frequency table for each support case
A concise report with design change suggestions

Image sets

Click an image to enlarge it. 1. Mode shapes and response · 2. Convergence and results

Software and models

ANSYS Mechanical
ANSYS Workbench
Modal

Analysis scope

Plate modeling with shell elements and the chosen support conditions
Clamped, simply supported, and free edge variations
Mode extraction up to the requested frequency range
A simple comparison with analytical values for a rectangular plate

Packages and prices

Choose how far the study should go. Each higher scope includes everything in the lower ones. Prices exclude 11% VAT.

Scope 1

Initial Calculations and Technical Analysis

US$219

excl. 11% VAT

Duration: 5 working days

Output: Calculation report (PDF)

Deliverables

Collection and review of mass, stiffness, support and dynamic load data
Analytical natural frequency and single-degree-of-freedom response estimates
Estimate of excitation-to-natural frequency ratio and resonance risk
Design adequacy against vibration limits and reference standards
Engineering calculation report (PDF)

Choose Scope 1

Scope 2 · most chosen

Calculations + Dynamics Simulation

US$516

excl. 11% VAT

Duration: 10 working days

Output: Report + dynamics simulation files

Includes all of Scope 1, plus

3D geometry modelling and meshing
Material, support, contact and load setup, then analysis runs in ANSYS Mechanical
Plate modeling with shell elements and the chosen support conditions
Clamped, simply supported, and free edge variations
Mode extraction up to the requested frequency range
A simple comparison with analytical values for a rectangular plate
Mode shape, frequency response and displacement analysis (contours and curves)
Damping sensitivity and mesh convergence check
Full analysis report with response curves (PDF + simulation files)

Choose Scope 2

Scope 3

Full Engineering Report + Design Recommendations

US$844

excl. 11% VAT

Duration: 15-20 working days

Output: Full engineering report + design recommendations

Includes all of Scope 1 & 2, plus

Design variant comparison and recommended optimal configuration
Workbench project file and the shell model
Mode shape images and a frequency table for each support case
A concise report with design change suggestions
Recommended changes to stiffness, mass or dampers
Vibration isolation and support placement recommendations
Resonance and vibration-fatigue risk analysis
Complete technical document ready for design and procurement (PDF)

Choose Scope 3

Payment: 50% down payment before work starts, balance after the report is delivered
Tax: Prices exclude 11% VAT
Data assumptions: Work is based on the data you provide; if the data changes, the scope may be reviewed
Revisions: Up to 2 revisions are included in the price

Frequently asked questions about Panel Plate Vibration Modes

What is included in the "Panel Plate Vibration Modes" package?

Geometry and mesh prepared from your drawings; Simulation case and data files (Fluent/CFX) with boundary settings; Technical report: assumptions, results and design recommendations; Contour, vector and animation outputs ready for presentation; A 60-minute results walkthrough and two rounds of revisions.

Can you simulate my own geometry?

Yes. Send CAD files or drawings and the operating conditions (flow rates, temperatures, materials). We prepare the geometry, mesh and boundary conditions for your case.

How long does it take?

Roughly 6 working days after we receive the geometry and conditions, depending on mesh size and how many design variants you want compared.

How is the price decided?

Each project has three packages: Scope 1 (calculations) US$219, Scope 2 (calculations + Dynamics simulation) US$516 and Scope 3 (full engineering report + design recommendations) US$844, excluding 11% VAT. Pick the one that fits; more design variants, transient runs, moving parts or validation against experiments adjust the quote after a short consultation.

Similar projects

See all

PreviousCantilever Beam Natural Frequencies

NextBrake Disc Vibration Modes

ANSYS, Fluent and CFX are trademarks of ANSYS, Inc.

Back to ANSYS Dynamics portfolio

Memuat

Project info

CategoryModal Analysis & Natural Frequencies

ComplexitySimple

Image sets2 pages

Estimated build time± 6 working days

SoftwareANSYS Fluent / CFX

PriceUS$219 - US$844

Deliverables

Workbench project file and the shell model

Mode shape images and a frequency table for each support case

A concise report with design change suggestions

Packages and prices

Choose how far the study should go. Each higher scope includes everything in the lower ones. Prices exclude 11% VAT.

Scope 1

Initial Calculations and Technical Analysis

US$219

excl. 11% VAT

Duration: 5 working days

Output: Calculation report (PDF)

Deliverables

Collection and review of mass, stiffness, support and dynamic load data
Analytical natural frequency and single-degree-of-freedom response estimates
Estimate of excitation-to-natural frequency ratio and resonance risk
Design adequacy against vibration limits and reference standards
Engineering calculation report (PDF)

Choose Scope 1

Scope 2 · most chosen

Calculations + Dynamics Simulation

US$516

excl. 11% VAT

Duration: 10 working days

Output: Report + dynamics simulation files

Includes all of Scope 1, plus

3D geometry modelling and meshing
Material, support, contact and load setup, then analysis runs in ANSYS Mechanical
Plate modeling with shell elements and the chosen support conditions
Clamped, simply supported, and free edge variations
Mode extraction up to the requested frequency range
A simple comparison with analytical values for a rectangular plate
Mode shape, frequency response and displacement analysis (contours and curves)
Damping sensitivity and mesh convergence check
Full analysis report with response curves (PDF + simulation files)

Choose Scope 2

Scope 3

Full Engineering Report + Design Recommendations

US$844

excl. 11% VAT

Duration: 15-20 working days

Output: Full engineering report + design recommendations

Includes all of Scope 1 & 2, plus

Design variant comparison and recommended optimal configuration
Workbench project file and the shell model
Mode shape images and a frequency table for each support case
A concise report with design change suggestions
Recommended changes to stiffness, mass or dampers
Vibration isolation and support placement recommendations
Resonance and vibration-fatigue risk analysis
Complete technical document ready for design and procurement (PDF)

Choose Scope 3

Payment: 50% down payment before work starts, balance after the report is delivered

Tax: Prices exclude 11% VAT

Data assumptions: Work is based on the data you provide; if the data changes, the scope may be reviewed

Revisions: Up to 2 revisions are included in the price

Frequently asked questions about Panel Plate Vibration Modes

What is included in the "Panel Plate Vibration Modes" package?

Can you simulate my own geometry?

Yes. Send CAD files or drawings and the operating conditions (flow rates, temperatures, materials). We prepare the geometry, mesh and boundary conditions for your case.

How long does it take?

Roughly 6 working days after we receive the geometry and conditions, depending on mesh size and how many design variants you want compared.

How is the price decided?

Panel Plate Vibration Modes

Project info

Deliverables

Image sets

Software and models

Analysis scope

Packages and prices

Initial Calculations and Technical Analysis

Calculations + Dynamics Simulation

Full Engineering Report + Design Recommendations

Frequently asked questions about Panel Plate Vibration Modes

Similar projects

Machine Frame Vibration Modes

Telecommunication Tower Natural Frequencies

Brake Disc Vibration Modes

Panel Plate Vibration Modes

Project info

Deliverables

Image sets

Software and models

Analysis scope

Packages and prices

Initial Calculations and Technical Analysis

Calculations + Dynamics Simulation

Full Engineering Report + Design Recommendations

Frequently asked questions about Panel Plate Vibration Modes

Similar projects

Machine Frame Vibration Modes

Telecommunication Tower Natural Frequencies

Brake Disc Vibration Modes