Antenna Array for 5G

Radiation pattern and beam direction of a patch element array

Category: Antennas & Waves (HFSS)Complexity: Complex

0 views

A simulation of a patch element array in the millimeter-wave band to see gain, beamwidth, and the effect of mutual coupling. The results help set element spacing and excitation phase to steer the beam.

Antenna Array for 5G: report page 1 (Fields and geometry)

Project info

CategoryAntennas & Waves (HFSS)
ComplexityComplex
Image sets2 pages
Estimated build time± 28 working days
SoftwareANSYS Fluent / CFX
PriceUS$453 - US$1,813

Deliverables

Electronics Desktop project files with the geometry
Two-dimensional and three-dimensional radiation patterns
A concise report on results and layout improvement suggestions

Image sets

Click an image to enlarge it. 1. Fields and geometry · 2. Response and results

Software and models

ANSYS Electronics Desktop
ANSYS HFSS
Driven Modal
Adaptive Meshing

Analysis scope

Modeling of patch elements, substrate, and feed network
Single-element analysis followed by the full array with mutual coupling
Excitation phase sweep for beam steering
Gain, beamwidth, and side lobe level calculation

Packages and prices

Choose how far the study should go. Each higher scope includes everything in the lower ones. Prices exclude 11% VAT.

Scope 1

Initial Calculations and Technical Analysis

US$453

excl. 11% VAT

Duration: 5 working days

Output: Calculation report (PDF)

Deliverables

Collection and review of geometry, material and excitation data
Analytical inductance, impedance, field or loss estimates for the main conditions
Analytical estimate of key quantities (flux, current, resonant frequency, gain)
Design adequacy against specifications and reference standards
Engineering calculation report (PDF)

Choose Scope 1

Scope 2 · most chosen

Calculations + Electromagnetic Simulation

US$1,078

excl. 11% VAT

Duration: 14 working days

Output: Report + electromagnetic simulation files

Includes all of Scope 1, plus

3D geometry modelling and meshing
Geometry, material, excitation and boundary setup, then solver runs in ANSYS HFSS
Modeling of patch elements, substrate, and feed network
Single-element analysis followed by the full array with mutual coupling
Excitation phase sweep for beam steering
Gain, beamwidth, and side lobe level calculation
Field distribution and response analysis (field plots and curves)
Adaptive mesh convergence and parameter sensitivity check
Full analysis report with result plots (PDF + simulation files)

Choose Scope 2

Scope 3

Full Engineering Report + Design Recommendations

US$1,813

excl. 11% VAT

Duration: 20-26 working days

Output: Full engineering report + design recommendations

Includes all of Scope 1 & 2, plus

Design variant comparison and recommended optimal configuration
Electronics Desktop project files with the geometry
Two-dimensional and three-dimensional radiation patterns
A concise report on results and layout improvement suggestions
Recommended changes to geometry, material or component configuration
Layout and component spacing recommendations
Performance risk and manufacturing tolerance analysis
Complete technical document ready for design and procurement (PDF)

Choose Scope 3

Payment: 50% down payment before work starts, balance after the report is delivered
Tax: Prices exclude 11% VAT
Data assumptions: Work is based on the data you provide; if the data changes, the scope may be reviewed
Revisions: Up to 2 revisions are included in the price

Frequently asked questions about Antenna Array for 5G

What is included in the "Antenna Array for 5G" package?

Geometry and mesh prepared from your drawings; Simulation case and data files (Fluent/CFX) with boundary settings; Technical report: assumptions, results and design recommendations; Contour, vector and animation outputs ready for presentation; A 60-minute results walkthrough and two rounds of revisions.

Can you simulate my own geometry?

Yes. Send CAD files or drawings and the operating conditions (flow rates, temperatures, materials). We prepare the geometry, mesh and boundary conditions for your case.

How long does it take?

Roughly 28 working days after we receive the geometry and conditions, depending on mesh size and how many design variants you want compared.

How is the price decided?

Each project has three packages: Scope 1 (calculations) US$453, Scope 2 (calculations + EM simulation) US$1,078 and Scope 3 (full engineering report + design recommendations) US$1,813, excluding 11% VAT. Pick the one that fits; more design variants, transient runs, moving parts or validation against experiments adjust the quote after a short consultation.

Similar projects

See all

PreviousMicrowave Filter

NextHigh-Speed PCB Trace Signal Integrity

ANSYS, Fluent and CFX are trademarks of ANSYS, Inc.

Back to ANSYS EM portfolio

Memuat

Project info

CategoryAntennas & Waves (HFSS)

ComplexityComplex

Image sets2 pages

Estimated build time± 28 working days

SoftwareANSYS Fluent / CFX

PriceUS$453 - US$1,813

Deliverables

Electronics Desktop project files with the geometry

Two-dimensional and three-dimensional radiation patterns

A concise report on results and layout improvement suggestions

Packages and prices

Choose how far the study should go. Each higher scope includes everything in the lower ones. Prices exclude 11% VAT.

Scope 1

Initial Calculations and Technical Analysis

US$453

excl. 11% VAT

Duration: 5 working days

Output: Calculation report (PDF)

Deliverables

Collection and review of geometry, material and excitation data
Analytical inductance, impedance, field or loss estimates for the main conditions
Analytical estimate of key quantities (flux, current, resonant frequency, gain)
Design adequacy against specifications and reference standards
Engineering calculation report (PDF)

Choose Scope 1

Scope 2 · most chosen

Calculations + Electromagnetic Simulation

US$1,078

excl. 11% VAT

Duration: 14 working days

Output: Report + electromagnetic simulation files

Includes all of Scope 1, plus

3D geometry modelling and meshing
Geometry, material, excitation and boundary setup, then solver runs in ANSYS HFSS
Modeling of patch elements, substrate, and feed network
Single-element analysis followed by the full array with mutual coupling
Excitation phase sweep for beam steering
Gain, beamwidth, and side lobe level calculation
Field distribution and response analysis (field plots and curves)
Adaptive mesh convergence and parameter sensitivity check
Full analysis report with result plots (PDF + simulation files)

Choose Scope 2

Scope 3

Full Engineering Report + Design Recommendations

US$1,813

excl. 11% VAT

Duration: 20-26 working days

Output: Full engineering report + design recommendations

Includes all of Scope 1 & 2, plus

Design variant comparison and recommended optimal configuration
Electronics Desktop project files with the geometry
Two-dimensional and three-dimensional radiation patterns
A concise report on results and layout improvement suggestions
Recommended changes to geometry, material or component configuration
Layout and component spacing recommendations
Performance risk and manufacturing tolerance analysis
Complete technical document ready for design and procurement (PDF)

Choose Scope 3

Payment: 50% down payment before work starts, balance after the report is delivered

Tax: Prices exclude 11% VAT

Data assumptions: Work is based on the data you provide; if the data changes, the scope may be reviewed

Revisions: Up to 2 revisions are included in the price

Frequently asked questions about Antenna Array for 5G

What is included in the "Antenna Array for 5G" package?

Can you simulate my own geometry?

Yes. Send CAD files or drawings and the operating conditions (flow rates, temperatures, materials). We prepare the geometry, mesh and boundary conditions for your case.

How long does it take?

Roughly 28 working days after we receive the geometry and conditions, depending on mesh size and how many design variants you want compared.

How is the price decided?

Antenna Array for 5G

Project info

Deliverables

Image sets

Software and models

Analysis scope

Packages and prices

Initial Calculations and Technical Analysis

Calculations + Electromagnetic Simulation

Full Engineering Report + Design Recommendations

Frequently asked questions about Antenna Array for 5G

Similar projects

Microwave Filter

Horn Antenna

Wi-Fi Patch Antenna

Antenna Array for 5G

Project info

Deliverables

Image sets

Software and models

Analysis scope

Packages and prices

Initial Calculations and Technical Analysis

Calculations + Electromagnetic Simulation

Full Engineering Report + Design Recommendations

Frequently asked questions about Antenna Array for 5G

Similar projects

Microwave Filter

Horn Antenna

Wi-Fi Patch Antenna