Memuat
Memuat
Spectrum Analysis with FFT for IoT and Embedded Systems
0 views
Identify dominant frequency components and noise in machine vibration measured by an IoT node accelerometer through the amplitude spectrum of synthetic FFT data. The FFT converts a time-domain signal into a frequency spectrum so dominant frequency components can be identified. It is used for vibration, biomedical, audio, and sensor data analysis in engineering theses.

Identify dominant frequency components and noise in machine vibration measured by an IoT node accelerometer through the amplitude spectrum of synthetic FFT data.
| Role | Variable | Unit |
|---|---|---|
| Main | Vibration acceleration | g |
| Supporting 1 | Machine rotation frequency | Hz |
| Supporting 2 | Sensor noise | g |
The spectrum of Vibration acceleration shows two dominant peaks at 38.1 Hz and 98.6 Hz with a spectral signal-to-noise ratio of 13.7 dB, and Machine rotation frequency and Sensor noise carry the same frequency components.
Computed from illustrative synthetic data, not from a real study.
The FFT converts a time-domain signal into a frequency spectrum so dominant frequency components can be identified. It is used for vibration, biomedical, audio, and sensor data analysis in engineering theses.
Report peak frequencies, their amplitudes, and the frequency resolution (fs/N). Explain spectral leakage if present and the window used.
A short starting script with this project's variable names. The delivered version is adapted to your data and fully commented.
rng(1);
fs = 1000;
machine_rotation_frequency = (0:1/fs:1-1/fs)'; % time vector
vibration_acceleration = sin(2*pi*50*machine_rotation_frequency) + 0.5*sin(2*pi*120*machine_rotation_frequency) + 0.4*randn(size(machine_rotation_frequency));
N = numel(vibration_acceleration);
yd = vibration_acceleration - mean(vibration_acceleration); % remove DC
Yf = fft(yd .* hann(N));
P2 = abs(Yf / sum(hann(N)) * 2);
P1 = P2(1:N/2+1);
P1(2:end-1) = 2 * P1(2:end-1);
f = fs * (0:N/2) / N;
[pks, locs] = findpeaks(P1, 'MinPeakHeight', 0.2);
for k = 1:numel(pks)
fprintf('Peak at %.1f Hz, amplitude %.3f\n', f(locs(k)), pks(k));
end
fprintf('Frequency resolution: %.2f Hz\n', fs / N);
[pxx, fp] = pwelch(yd, hamming(256), 128, 1024, fs);
figure;
subplot(3,1,1); plot(machine_rotation_frequency(1:300), vibration_acceleration(1:300)); xlabel('Time (s)'); ylabel('Signal');
subplot(3,1,2); plot(f, P1); xlabel('Frequency (Hz)'); ylabel('Amplitude');
subplot(3,1,3); plot(fp, 10*log10(pxx)); xlabel('Frequency (Hz)'); ylabel('PSD (dB/Hz)');Choose how much help you need. Each higher package includes everything in the lower ones. Prices exclude 11% VAT.
Package 1
US$25
excl. 11% VAT
Duration: 5 working days
Output: MATLAB files + result figures
Deliverables
Package 2 · most chosen
US$69
excl. 11% VAT
Duration: 9 working days
Output: Code + analysis + interpretation notes
Includes all of Package 1, plus
Package 3
US$150
excl. 11% VAT
Duration: 14-17 working days
Output: Code + analysis + guidance until ready to present
Includes all of Packages 1 & 2, plus
Yes. Spectrum Analysis with FFT is commonly used at this level in IoT and Embedded Systems. We adapt the analysis to your research question, your own data and your supervisor's requirements.
No. The sheet is computed from illustrative synthetic data so you can see the kind of output MATLAB gives. For your order we run the same method on your own data.
That is the point of the packages. Every script is commented, and Package 3 includes two coaching sessions plus practice questions so you can explain the method and the results at your seminar and defence.
Each project has three packages: Package 1 (code and explanation) US$25, Package 2 (your data analysis and interpretation) US$69 and Package 3 (full guidance) US$150, excluding 11% VAT. Larger datasets, extra methods or tight deadlines adjust the quote after a short consultation.
The result sheet uses illustrative synthetic data. MATLAB is a trademark of The MathWorks, Inc.
Back to MATLAB portfolio