Memuat
Memuat
Spectrum Analysis with FFT for Geodesy and Remote Sensing
0 views
Identify the dominant frequency components of sea surface height using FFT and assess the effect of altimeter noise on the spectrum. The FFT converts a time-domain signal into a frequency spectrum so dominant frequency components can be identified. It is used for vibration, biomedical, audio, and sensor data analysis in engineering theses.

Identify the dominant frequency components of sea surface height using FFT and assess the effect of altimeter noise on the spectrum.
| Role | Variable | Unit |
|---|---|---|
| Main | Sea surface height | m |
| Supporting 1 | Tidal frequency | cpd |
| Supporting 2 | Altimeter noise | cm |
The spectrum of Sea surface height shows two dominant peaks at 11.2 Hz and 28.8 Hz with a spectral signal-to-noise ratio of 6.6 dB, and Tidal frequency and Altimeter noise carry the same frequency components.
Computed from illustrative synthetic data, not from a real study.
The FFT converts a time-domain signal into a frequency spectrum so dominant frequency components can be identified. It is used for vibration, biomedical, audio, and sensor data analysis in engineering theses.
Report peak frequencies, their amplitudes, and the frequency resolution (fs/N). Explain spectral leakage if present and the window used.
A short starting script with this project's variable names. The delivered version is adapted to your data and fully commented.
rng(1);
fs = 1000;
tidal_frequency = (0:1/fs:1-1/fs)'; % time vector
sea_surface_height = sin(2*pi*50*tidal_frequency) + 0.5*sin(2*pi*120*tidal_frequency) + 0.4*randn(size(tidal_frequency));
N = numel(sea_surface_height);
yd = sea_surface_height - mean(sea_surface_height); % remove DC
Yf = fft(yd .* hann(N));
P2 = abs(Yf / sum(hann(N)) * 2);
P1 = P2(1:N/2+1);
P1(2:end-1) = 2 * P1(2:end-1);
f = fs * (0:N/2) / N;
[pks, locs] = findpeaks(P1, 'MinPeakHeight', 0.2);
for k = 1:numel(pks)
fprintf('Peak at %.1f Hz, amplitude %.3f\n', f(locs(k)), pks(k));
end
fprintf('Frequency resolution: %.2f Hz\n', fs / N);
[pxx, fp] = pwelch(yd, hamming(256), 128, 1024, fs);
figure;
subplot(3,1,1); plot(tidal_frequency(1:300), sea_surface_height(1:300)); xlabel('Time (s)'); ylabel('Signal');
subplot(3,1,2); plot(f, P1); xlabel('Frequency (Hz)'); ylabel('Amplitude');
subplot(3,1,3); plot(fp, 10*log10(pxx)); xlabel('Frequency (Hz)'); ylabel('PSD (dB/Hz)');Choose how much help you need. Each higher package includes everything in the lower ones. Prices exclude 11% VAT.
Package 1
US$25
excl. 11% VAT
Duration: 5 working days
Output: MATLAB files + result figures
Deliverables
Package 2 · most chosen
US$72
excl. 11% VAT
Duration: 9 working days
Output: Code + analysis + interpretation notes
Includes all of Package 1, plus
Package 3
US$159
excl. 11% VAT
Duration: 14-17 working days
Output: Code + analysis + guidance until ready to present
Includes all of Packages 1 & 2, plus
Yes. Spectrum Analysis with FFT is commonly used at this level in Geodesy and Remote Sensing. We adapt the analysis to your research question, your own data and your supervisor's requirements.
No. The sheet is computed from illustrative synthetic data so you can see the kind of output MATLAB gives. For your order we run the same method on your own data.
That is the point of the packages. Every script is commented, and Package 3 includes two coaching sessions plus practice questions so you can explain the method and the results at your seminar and defence.
Each project has three packages: Package 1 (code and explanation) US$25, Package 2 (your data analysis and interpretation) US$72 and Package 3 (full guidance) US$159, excluding 11% VAT. Larger datasets, extra methods or tight deadlines adjust the quote after a short consultation.
The result sheet uses illustrative synthetic data. MATLAB is a trademark of The MathWorks, Inc.
Back to MATLAB portfolio