Memuat
Memuat
Spectrum Analysis with FFT for Chemical and Process Engineering
0 views
Analyse the pressure fluctuation and the influence of dominant frequency and measurement noise through Spectrum Analysis with FFT. The FFT converts a time-domain signal into a frequency spectrum so dominant frequency components can be identified. It is used for vibration, biomedical, audio, and sensor data analysis in engineering theses.

Analyse the pressure fluctuation and the influence of dominant frequency and measurement noise through Spectrum Analysis with FFT.
| Role | Variable | Unit |
|---|---|---|
| Main | pressure fluctuation | kPa |
| Supporting 1 | dominant frequency | Hz |
| Supporting 2 | measurement noise | kPa |
The spectrum of pressure fluctuation shows two dominant peaks at 21.0 Hz and 54.7 Hz with a spectral signal-to-noise ratio of 18.6 dB, and dominant frequency and measurement noise carry the same frequency components.
Computed from illustrative synthetic data, not from a real study.
The FFT converts a time-domain signal into a frequency spectrum so dominant frequency components can be identified. It is used for vibration, biomedical, audio, and sensor data analysis in engineering theses.
Report peak frequencies, their amplitudes, and the frequency resolution (fs/N). Explain spectral leakage if present and the window used.
A short starting script with this project's variable names. The delivered version is adapted to your data and fully commented.
rng(1);
fs = 1000;
dominant_frequency = (0:1/fs:1-1/fs)'; % time vector
pressure_fluctuation = sin(2*pi*50*dominant_frequency) + 0.5*sin(2*pi*120*dominant_frequency) + 0.4*randn(size(dominant_frequency));
N = numel(pressure_fluctuation);
yd = pressure_fluctuation - mean(pressure_fluctuation); % remove DC
Yf = fft(yd .* hann(N));
P2 = abs(Yf / sum(hann(N)) * 2);
P1 = P2(1:N/2+1);
P1(2:end-1) = 2 * P1(2:end-1);
f = fs * (0:N/2) / N;
[pks, locs] = findpeaks(P1, 'MinPeakHeight', 0.2);
for k = 1:numel(pks)
fprintf('Peak at %.1f Hz, amplitude %.3f\n', f(locs(k)), pks(k));
end
fprintf('Frequency resolution: %.2f Hz\n', fs / N);
[pxx, fp] = pwelch(yd, hamming(256), 128, 1024, fs);
figure;
subplot(3,1,1); plot(dominant_frequency(1:300), pressure_fluctuation(1:300)); xlabel('Time (s)'); ylabel('Signal');
subplot(3,1,2); plot(f, P1); xlabel('Frequency (Hz)'); ylabel('Amplitude');
subplot(3,1,3); plot(fp, 10*log10(pxx)); xlabel('Frequency (Hz)'); ylabel('PSD (dB/Hz)');Choose how much help you need. Each higher package includes everything in the lower ones. Prices exclude 11% VAT.
Package 1
US$22
excl. 11% VAT
Duration: 5 working days
Output: MATLAB files + result figures
Deliverables
Package 2 · most chosen
US$66
excl. 11% VAT
Duration: 9 working days
Output: Code + analysis + interpretation notes
Includes all of Package 1, plus
Package 3
US$144
excl. 11% VAT
Duration: 14-17 working days
Output: Code + analysis + guidance until ready to present
Includes all of Packages 1 & 2, plus
Yes. Spectrum Analysis with FFT is commonly used at this level in Chemical and Process Engineering. We adapt the analysis to your research question, your own data and your supervisor's requirements.
No. The sheet is computed from illustrative synthetic data so you can see the kind of output MATLAB gives. For your order we run the same method on your own data.
That is the point of the packages. Every script is commented, and Package 3 includes two coaching sessions plus practice questions so you can explain the method and the results at your seminar and defence.
Each project has three packages: Package 1 (code and explanation) US$22, Package 2 (your data analysis and interpretation) US$66 and Package 3 (full guidance) US$144, excluding 11% VAT. Larger datasets, extra methods or tight deadlines adjust the quote after a short consultation.
The result sheet uses illustrative synthetic data. MATLAB is a trademark of The MathWorks, Inc.
Back to MATLAB portfolio