Memuat
Memuat
Butterworth IIR Filter for Chemical and Process Engineering
0 views
Analyse the reactor temperature and the influence of filter order and thermocouple noise through Butterworth IIR Filter. A Butterworth IIR filter gives the flattest passband magnitude response with a low order. It suits sensor or biomedical filtering when computational efficiency matters more than linear phase.

Analyse the reactor temperature and the influence of filter order and thermocouple noise through Butterworth IIR Filter.
| Role | Variable | Unit |
|---|---|---|
| Main | reactor temperature | °C |
| Supporting 1 | filter order | - |
| Supporting 2 | thermocouple noise | °C |
The order-3 Butterworth filter (119 Hz cutoff) attenuates 43.4 dB at three times the cutoff and yields 13.3 dB SNR with an RMS error of 0.163 against filter order; all poles stay inside the unit circle (max radius 0.702).
Computed from illustrative synthetic data, not from a real study.
A Butterworth IIR filter gives the flattest passband magnitude response with a low order. It suits sensor or biomedical filtering when computational efficiency matters more than linear phase.
Report the order, cutoff, frequency response, and SNR improvement. Explain the choice between causal and zero-phase filtering according to the application.
A short starting script with this project's variable names. The delivered version is adapted to your data and fully commented.
rng(3);
fs = 500;
filter_order = (0:1/fs:4-1/fs)';
clean = sin(2*pi*5*filter_order) + 0.5*sin(2*pi*12*filter_order);
reactor_temperature = clean + 0.8*randn(size(filter_order)); % noisy signal
fc = 20;
[z, p, k] = butter(4, fc/(fs/2), 'low');
sos = zp2sos(z, p, k);
y_zero = sosfilt(sos, flipud(sosfilt(sos, flipud(reactor_temperature)))); % zero-phase (forward-backward)
y_caus = sosfilt(sos, reactor_temperature); % causal
snr = @(x, ref) 10*log10(sum(ref.^2) / sum((x - ref).^2));
fprintf('SNR raw: %.2f dB\n', snr(reactor_temperature, clean));
fprintf('SNR causal: %.2f dB\n', snr(y_caus, clean));
fprintf('SNR zero-phase: %.2f dB\n', snr(y_zero, clean));
[h, w] = freqz(sos, 1024, fs);
figure;
subplot(2,1,1); plot(w, 20*log10(abs(h))); grid on;
xlabel('Frequency (Hz)'); ylabel('Magnitude (dB)'); ylim([-80 5]);
subplot(2,1,2);
idx = 1:500;
plot(filter_order(idx), reactor_temperature(idx), filter_order(idx), y_zero(idx), filter_order(idx), y_caus(idx), 'LineWidth', 1.1);
legend('Noisy', 'Zero-phase', 'Causal'); xlabel('Time (s)');Choose how much help you need. Each higher package includes everything in the lower ones. Prices exclude 11% VAT.
Package 1
US$25
excl. 11% VAT
Duration: 5 working days
Output: MATLAB files + result figures
Deliverables
Package 2 · most chosen
US$69
excl. 11% VAT
Duration: 9 working days
Output: Code + analysis + interpretation notes
Includes all of Package 1, plus
Package 3
US$153
excl. 11% VAT
Duration: 14-17 working days
Output: Code + analysis + guidance until ready to present
Includes all of Packages 1 & 2, plus
Yes. Butterworth IIR Filter is commonly used at this level in Chemical and Process Engineering. We adapt the analysis to your research question, your own data and your supervisor's requirements.
No. The sheet is computed from illustrative synthetic data so you can see the kind of output MATLAB gives. For your order we run the same method on your own data.
That is the point of the packages. Every script is commented, and Package 3 includes two coaching sessions plus practice questions so you can explain the method and the results at your seminar and defence.
Each project has three packages: Package 1 (code and explanation) US$25, Package 2 (your data analysis and interpretation) US$69 and Package 3 (full guidance) US$153, excluding 11% VAT. Larger datasets, extra methods or tight deadlines adjust the quote after a short consultation.
The result sheet uses illustrative synthetic data. MATLAB is a trademark of The MathWorks, Inc.
Back to MATLAB portfolio