Memuat
Memuat
Four slice corners are pulled until the image fits a board angled away from the projector.
0 views
A board angled away from the projector is mapped with a corner pin. A photo of the surface is used as the Output Guide, the slice is brought close in Transform mode, and its four corners are pulled and locked with numbers in Edit Points mode until the grid sits straight on the board.

The photo of the angled wall is loaded as the guide and its visibility is set so the slice stays readable on top.
The slice is moved and shrunk until it roughly covers the board.
Each corner is dragged to a corner of the board, then locked with X and Y values.
The corners are checked up close, then the Slice Grid confirms the lines follow the board perspective.
The guide is switched off to see the real output, brightness is adjusted, and the setup is saved as the "Dinding Miring" preset.
Surface
A rectangular board standing at an angle in a room (guide photo included).
Content
The Grid Mapping clip, so straight lines are easy to check.
"Dinding Miring" Advanced Output preset (.xml); Angled wall guide photo (PNG); The "Mapping CID" practice composition (.avc); 8 practice content clips (MP4): Grid Mapping, Side A/B/C, Colour Waves, Neon Rings, Blinking Windows, Light Sweep; Step-by-step PDF guide; Notes on installing the preset and swapping the content.
Not necessarily. The project is rated "intermediate", and the main steps are explained on this page. The matching video lesson builds it click by click.
Yes. Load the preset, replace the guide photo with a photo of your surface, move the points to fit, and play your own clips. If you would like us to map it for you, message us on WhatsApp.
The project costs US$17. Use the "Buy via WhatsApp" button on this page; the project files are delivered after payment is confirmed.
Found a problem or have a suggestion for this project? Tell us on WhatsApp
Back to Resolume Arena portfolio