Graphite Ergonomic Mouse

A mouse body lofted from nine sections with button gaps

Category: Product DesignLevel: Intermediate

0 views

The ergonomic mouse body is a Loft through nine D-shaped sections leaning slightly to the right, then cut with BooleanDifference for the left and right button gap, the cross gap and the scroll wheel pocket. The scroll wheel is a rubber cylinder with 30 ribs. The left side has two gunmetal thumb buttons and the rear carries a blue LED strip made with Pipe.

Graphite Ergonomic Mouse: Rhino 3D model

Project info

CategoryProduct Design
LevelIntermediate
ToolRhino 3D · Rhino 8
Price (one price)US$80

Object: 35 objects, 4 layers, units: millimeters

The project file you can download

The real project file is available. It is not just the pictures on this page: you get the working model with its NURBS geometry and layers. It can be downloaded after payment, and we send the download link by WhatsApp or email.

ZIP: original .3dm + render

What is inside the file

The original Rhino model file (.3dm) with tidy layers, NURBS and units, ready to open and edit
Rendered image of the model
A BACA-DULU.txt file with the Rhino version, units and layer notes
All packed in one ZIP file

Project file: The actual project file (not just the picture) is available to download once payment is complete; we send the download link by WhatsApp or email
Payment: One price per project, paid in full upfront; the file is sent once payment is received
Tax: Prices exclude 11% VAT
Customisation: Adapting it to your own size or design can be ordered separately via WhatsApp

Modelling techniques

Loft through cross-sections
BooleanDifference for holes and cuts
Pipe along curves
Cap to close planar ends
Solid primitives: Box, Cylinder, Ellipsoid
PBR materials + Raytraced (Cycles) render

Modelling steps

1Open mouse-ergonomis.3dm in Rhino 8 (units: millimeters).
2Restore the camera from Named Views > Render, then switch the viewport to Raytraced.
3Adjust the hump: change the section heights, Loft again and repeat the BooleanDifference cuts.
4Swap colors or finishes in the Materials panel; every object already uses a named PBR material.
5Export selected parts to STL, OBJ or other formats via File > Export Selected.

Price and ordering

US$80

One price for the whole project file, excl. 11% VAT

Order the file via WhatsApp

Frequently asked questions

Do I get the real file?

Yes. The pictures on this page are only previews. After payment we send the download link of the real project file (a ZIP containing the original .3dm model, images and a BACA-DULU.txt note) by WhatsApp or email.

Which Rhino 3D version do I need?

The file was made in Rhino 8 (Rhino 8). Newer versions open it too.

Can you adapt it to my design?

Yes, as a separate order. Message us on WhatsApp with a short description of the size and shape you want.

Similar projects

See all

PreviousPond Garden with Stepping Stones

NextPrintable Twisted Vase Trio

Images are real captures of Rhino 8 and Grasshopper taken from the project files. Rhino and Grasshopper are trademarks of Robert McNeel & Associates.

Back to Rhino 3D portfolio

Memuat

The project file you can download

ZIP: original .3dm + render

What is inside the file

The original Rhino model file (.3dm) with tidy layers, NURBS and units, ready to open and edit

Rendered image of the model

A BACA-DULU.txt file with the Rhino version, units and layer notes

All packed in one ZIP file

Project file: The actual project file (not just the picture) is available to download once payment is complete; we send the download link by WhatsApp or email

Payment: One price per project, paid in full upfront; the file is sent once payment is received

Tax: Prices exclude 11% VAT

Customisation: Adapting it to your own size or design can be ordered separately via WhatsApp

Modelling steps

1Open mouse-ergonomis.3dm in Rhino 8 (units: millimeters).

2Restore the camera from Named Views > Render, then switch the viewport to Raytraced.

3Adjust the hump: change the section heights, Loft again and repeat the BooleanDifference cuts.

4Swap colors or finishes in the Materials panel; every object already uses a named PBR material.

5Export selected parts to STL, OBJ or other formats via File > Export Selected.

Frequently asked questions

Do I get the real file?

Which Rhino 3D version do I need?

The file was made in Rhino 8 (Rhino 8). Newer versions open it too.

Can you adapt it to my design?

Yes, as a separate order. Message us on WhatsApp with a short description of the size and shape you want.

Graphite Ergonomic Mouse

Project info

The project file you can download

What is inside the file

Modelling techniques

Modelling steps

Price and ordering

Frequently asked questions

Similar projects

Steel Thermos Bottle Duo

Pebble Earbud Case

Studio Over-Ear Headphones

Graphite Ergonomic Mouse

Project info

The project file you can download

What is inside the file

Modelling techniques

Modelling steps

Price and ordering

Frequently asked questions

Similar projects

Steel Thermos Bottle Duo

Pebble Earbud Case

Studio Over-Ear Headphones