Memuat
Memuat
Twelve simulation branches measure BER against Eb/N0 and check it against theory.
0 views
Three groups of branches, each with four Eb/N0 values (0, 3, 6 and 9 dB) in a single model: QPSK over an AWGN channel, 16-QAM over an AWGN channel, and QPSK over a Rayleigh fading channel with coherent detection (ideal CSI). Each branch has a Bernoulli source, modulator, channel, demodulator and Error Rate Calculation. This is a QAM/PSK model, not OFDM and not a 5G system.

A Bernoulli Binary Generator produces 1000 symbols per frame at 1 Msymbol per second.
Bits are mapped to QPSK or 16-QAM symbols.
An AWGN channel with the set Eb/N0; the third group adds a SISO Fading Channel (Rayleigh, single path) with a 1 kHz maximum Doppler shift.
On the fading channel the signal is divided by the channel gain (ideal CSI) before the demodulator.
Error Rate Calculation gives the BER, error count and bit count; the result is plotted against the berawgn and berfading theory curves.
System
A QPSK and 16-QAM digital link over AWGN and Rayleigh channels, with 12 parallel branches in one model.
Scenario
One simulated second (1000 frames); about 2 million bits per branch. Requires the Communications Toolbox.
Note: Not OFDM and not 5G: only QPSK/16-QAM with ideal CSI and a single fading path. Requires the Communications Toolbox.
Simulink model link_digital_ber_kanal_fading.slx (standard block diagram); Builder script buat_model.m and runner jalankan.m; Result plots grafik_ber dan grafik_konstelasi (PNG) and metrik.json; Step-by-step PDF guide (sent with the package; also part of the video class); Video tutorial in the MATLAB Simulink 2026 Trends class (this project's episode; episode 1 is free); Requires MATLAB and Simulink (built in R2025b); the slh.m builder helper is included.
Yes. The .slx model opens in MATLAB with Simulink (built in R2025b; use the same or a newer release). Project 09 also needs the Communications Toolbox. The package includes the builder script and the runner, so you can also rebuild the model and rerun the plots yourself.
Yes. Parameters are kept in the Model Workspace, so you can change values such as gains, capacities and profiles and rerun the simulation. If you would like us to adapt or extend the model for you, message us on WhatsApp.
The project costs US$17. Use the "Buy via WhatsApp" button on this page; the project files are delivered after payment is confirmed.
Found a problem or have a suggestion for this project? Tell us on WhatsApp
Back to MATLAB Simulink portfolio