Memuat
Memuat
A techwear set: an oversized hoodie with a kangaroo pocket and cargo joggers with flap pockets.
0 views
A techwear set for the Luka avatar. The oversized hoodie has dropped shoulders, a two-piece hood, a kangaroo pocket and rib at the sleeve ends and hem; the cargo joggers have an elastic waistband, flap cargo pockets on the thighs, back pockets and rib cuffs at the ankles. The rib is cut shorter than the edges it is sewn to, so the ends draw in by themselves during simulation.


A one-piece front, a back and two sleeves are made from basic blocks sized to Luka with 190 mm of ease and shoulders widened by 45 mm.
The sleeve cuffs and hem rib are shorter than the edges they join (the hem rib is 0.84 times the body width), so the fabric above them blouses.
Two hood halves are sewn along the centre line, then to the front and back neckline. The kangaroo pocket is patched on the front with its two slanted sides left open.
Four-piece trousers with 120 mm of ease are sewn to front and back elastic waistbands shorter than the trouser waist; rib cuffs are sewn at the ankles.
The cargo pockets and their flaps are patched on the outer thighs, each with selected edges left open; two back pockets are patched on the back pieces.
Each piece is placed on an avatar arrangement point and given a layer number. The simulation runs in two phases: first without gravity so the seams close, then with normal gravity.
Fabrics
Olive fleece for the hoodie, black rib (our own texture) for the cuffs, hem rib and waistband, and charcoal twill for the trousers.
Avatar
The stock CLO male avatar (Luka). Pattern sizes are derived from the avatar body: chest 985 mm, waist 805 mm, hip 970 mm.
Note: The hood has no drawcord and the cargo pockets have no volume (they are patched flat). The patterns were built from a millimetre-based pattern library in Marvelous Designer, and the .zprj file was then opened in CLO3D 2025. Buttons, buckles and zippers are small sewn fabric pieces, not 3D trims. The avatar is a stock CLO avatar and the fabric textures are our own. The patterns are not graded and are not prepared for production. The images on this page are captures of the CLO3D 2025 3D window after opening the .zprj file (not final renders).
The Hoodie_Cargo_Jogger.zprj file: fully open in CLO3D and Marvelous Designer (2D patterns, seams, fabrics); Our own PNG fabric textures: rib_hitam.png, netral_halus.png, netral.png; Preview images of the garment (front, back, side, three-quarter); READ-ME: the list of pattern pieces, fabrics and how to open the file; Step-by-step PDF guide (coming soon, sent once finished); Video tutorial on making the garment (coming soon); Requires CLO3D or Marvelous Designer (made with the 2025 release; use the same or a newer release).
The .zprj file opens in CLO3D and in Marvelous Designer (made with the 2025 release; use the same or a newer release). The 2D patterns, seams and fabrics are all open and editable. The patterns were built in Marvelous Designer from a millimetre-based pattern library, then the file was opened in CLO3D 2025.
No. Buttons, buckles and zippers are small sewn fabric pieces, and some yoke, quilting and pleat lines are internal style lines rather than separate pieces. You can replace them with real CLO3D trims yourself after opening the file.
Yes. The patterns are sized to the stock Luka avatar and are not graded, but every 2D pattern is open, so you can edit the pieces, swap fabrics and replace the textures, then simulate again. If you would like us to adapt the garment for you, message us on WhatsApp.
The project costs US$17. Use the "Buy via WhatsApp" button on this page; the project files are sent over WhatsApp after payment is confirmed.
Found a problem or have a suggestion for this project? Tell us on WhatsApp
Back to CLO3D portfolio