Memuat
Memuat
Javanese men's formal wear: a black velvet beskap, lurik stagen, an epek belt with a timang buckle and a pleated parang batik jarik.
0 views
A Javanese formal outfit for the Luka avatar. The black velvet beskap has a stand collar, an overlapping front closure, five gold buttons, welt-style pockets and buttons at the sleeve ends. Under it sit a lurik stagen sash, a red epek belt with a timang buckle and a parang batik jarik with front pleats (wiru). The parang and lurik motifs are our own textures. This stacked outfit trains layer control from the wrap cloth up to the jacket.


The jarik is made from a front and a back piece tapering to the waist and sewn at both sides. The wiru is a patch piece at the front with four pleat lines drawn as internal lines.
The lurik stagen and the epek are each two pieces sewn into a loop at the waist; the lower edge of the stagen is sewn to the top of the jarik, and the timang is patched onto the front epek.
Two fronts with a 62 mm extension, a back and two sleeves are made from basic blocks sized to Luka; the front tip is lengthened so the hem slants. The centre-back seam is drawn as an internal line.
The left front edge is sewn to an internal line on the right front, so the left side closes over the right.
A three-segment stand collar is sewn to the neckline. Five front buttons, two buttons at each sleeve end and two welt-style pockets are added as small fabric pieces on the top layer.
Each piece is placed on an avatar arrangement point and given a layer number. The simulation runs in two phases: first without gravity so the seams close, then with normal gravity.
Fabrics
Black velvet for the beskap, parang batik (our own texture) for the jarik, lurik (our own texture) for the stagen, red velvet for the epek and gold satin for the buttons and timang.
Avatar
The stock CLO male avatar (Luka). Pattern sizes are derived from the avatar body: chest 985 mm, waist 805 mm, hip 970 mm.
Note: The wiru and the pockets are patch pieces with internal lines (not real pleats or pocket openings), and the jarik is made from two sewn pieces, not one wrapped cloth. This is a visualisation, not a rendition of a specific court dress code. The patterns were built from a millimetre-based pattern library in Marvelous Designer, and the .zprj file was then opened in CLO3D 2025. Buttons, buckles and zippers are small sewn fabric pieces, not 3D trims. The avatar is a stock CLO avatar and the fabric textures are our own. The patterns are not graded and are not prepared for production. The images on this page are captures of the CLO3D 2025 3D window after opening the .zprj file (not final renders).
The Beskap_Jawa_Jarik.zprj file: fully open in CLO3D and Marvelous Designer (2D patterns, seams, fabrics); Our own PNG fabric textures: batik_parang.png, lurik.png, netral_halus.png; Preview images of the garment (front, back, side, three-quarter); READ-ME: the list of pattern pieces, fabrics and how to open the file; Step-by-step PDF guide (coming soon, sent once finished); Video tutorial on making the garment (coming soon); Requires CLO3D or Marvelous Designer (made with the 2025 release; use the same or a newer release).
The .zprj file opens in CLO3D and in Marvelous Designer (made with the 2025 release; use the same or a newer release). The 2D patterns, seams and fabrics are all open and editable. The patterns were built in Marvelous Designer from a millimetre-based pattern library, then the file was opened in CLO3D 2025.
No. Buttons, buckles and zippers are small sewn fabric pieces, and some yoke, quilting and pleat lines are internal style lines rather than separate pieces. You can replace them with real CLO3D trims yourself after opening the file.
Yes. The patterns are sized to the stock Luka avatar and are not graded, but every 2D pattern is open, so you can edit the pieces, swap fabrics and replace the textures, then simulate again. If you would like us to adapt the garment for you, message us on WhatsApp.
The project costs US$24. Use the "Buy via WhatsApp" button on this page; the project files are sent over WhatsApp after payment is confirmed.
Found a problem or have a suggestion for this project? Tell us on WhatsApp
Back to CLO3D portfolio