Memuat
Memuat
A plaid flannel shirt with a two-piece collar, flap chest pockets and cuffs, paired with five-pocket indigo jeans.
0 views
A casual outfit for the Luka avatar. The red plaid flannel shirt has a collar stand and fall, two flap chest pockets, cuffs, and a yoke line and centre pleat on the back; the indigo jeans have a waistband, two back pockets, a coin pocket, and front pocket openings and a fly drawn as style lines. The plaid motif and denim texture are our own.


Two fronts with a 16 mm button extension, a back and two sleeves are made from basic blocks sized to Luka with 96 mm of ease. A yoke line and two centre-pleat lines are drawn on the back.
A three-segment collar stand is sewn to the neckline with the collar fall on top; cuffs are sewn to the sleeve ends.
Five-sided pockets are patched on the right and left chest with the top edge open; the flaps are sewn along their top edge only.
Two fronts and two backs are sewn at the side, inseam and crotch, then given front and back waistbands slightly shorter than the trouser waist.
Two back pockets and one coin pocket are patched on as fabric pieces; the two front pocket openings and the fly are drawn as internal lines.
Each piece is placed on an avatar arrangement point and given a layer number. The simulation runs in two phases: first without gravity so the seams close, then with normal gravity.
Fabrics
Red plaid flannel (our own texture) for the shirt and indigo denim (our own texture) for the jeans.
Avatar
The stock CLO male avatar (Luka). Pattern sizes are derived from the avatar body: chest 985 mm, waist 805 mm, hip 970 mm.
Note: This shirt has no buttons, the yoke and back pleat are style lines only, and the two front jeans pockets and the fly are drawn (not openings). The patterns were built from a millimetre-based pattern library in Marvelous Designer, and the .zprj file was then opened in CLO3D 2025. Buttons, buckles and zippers are small sewn fabric pieces, not 3D trims. The avatar is a stock CLO avatar and the fabric textures are our own. The patterns are not graded and are not prepared for production. The images on this page are captures of the CLO3D 2025 3D window after opening the .zprj file (not final renders).
The Kemeja_Flanel_Jeans.zprj file: fully open in CLO3D and Marvelous Designer (2D patterns, seams, fabrics); Our own PNG fabric textures: flanel_merah.png, denim_indigo.png; Preview images of the garment (front, back, side, three-quarter); READ-ME: the list of pattern pieces, fabrics and how to open the file; Step-by-step PDF guide (coming soon, sent once finished); Video tutorial on making the garment (coming soon); Requires CLO3D or Marvelous Designer (made with the 2025 release; use the same or a newer release).
The .zprj file opens in CLO3D and in Marvelous Designer (made with the 2025 release; use the same or a newer release). The 2D patterns, seams and fabrics are all open and editable. The patterns were built in Marvelous Designer from a millimetre-based pattern library, then the file was opened in CLO3D 2025.
No. Buttons, buckles and zippers are small sewn fabric pieces, and some yoke, quilting and pleat lines are internal style lines rather than separate pieces. You can replace them with real CLO3D trims yourself after opening the file.
Yes. The patterns are sized to the stock Luka avatar and are not graded, but every 2D pattern is open, so you can edit the pieces, swap fabrics and replace the textures, then simulate again. If you would like us to adapt the garment for you, message us on WhatsApp.
The project costs US$17. Use the "Buy via WhatsApp" button on this page; the project files are sent over WhatsApp after payment is confirmed.
Found a problem or have a suggestion for this project? Tell us on WhatsApp
Back to CLO3D portfolio