Memuat
Memuat
Three stacked garments: a leather biker jacket with an asymmetric opening, a T-shirt underneath and black jeans.
0 views
A biker outfit for the Luka avatar. The black leather jacket has an asymmetric front opening, a stand collar, epaulettes, slanted zipper pockets, a chest pocket, a hem band with a buckle tab and cuffs; under it is a jersey T-shirt, and below black jeans with back pockets. The shoulder quilting, back yoke and back pleats are drawn as style lines. The leather and denim textures are our own.


The T-shirt is made from a one-piece front and a back with 60 mm of ease, sewn at the shoulders and sides and placed on the innermost layer.
Two fronts with a 70 mm extension, a back and two sleeves are made with 150 mm of ease. The right front edge is sewn to an internal line on the left front so the opening sits off-centre.
A three-segment stand collar is sewn to the neckline. The three-piece hem band and the cuffs are slightly shorter than the edges they are sewn to, so the jacket hem and sleeve ends draw in.
Epaulettes, two slanted zipper pockets, a chest pocket and a buckle tab are added as patch pieces. The shoulder quilting, back yoke and two back pleats are drawn as internal lines.
Four-piece trousers are sewn at the side, inseam and crotch, given front and back waistbands and two five-sided back pockets.
Each piece is placed on an avatar arrangement point and given a layer number. The simulation runs in two phases: first without gravity so the seams close, then with normal gravity.
Fabrics
Black leather (the stock vegan-leather preset with our own texture) for the jacket, off-white jersey for the T-shirt, black denim (our own texture) for the jeans and metal-coloured satin for the zipper and buckle pieces.
Avatar
The stock CLO male avatar (Luka). Pattern sizes are derived from the avatar body: chest 985 mm, waist 805 mm, hip 970 mm.
Note: Zippers are represented by metal-coloured fabric pieces, not working zippers, and the quilting, yoke and back pleats are style lines only. The patterns were built from a millimetre-based pattern library in Marvelous Designer, and the .zprj file was then opened in CLO3D 2025. Buttons, buckles and zippers are small sewn fabric pieces, not 3D trims. The avatar is a stock CLO avatar and the fabric textures are our own. The patterns are not graded and are not prepared for production. The images on this page are captures of the CLO3D 2025 3D window after opening the .zprj file (not final renders).
The Jaket_Biker_Kulit.zprj file: fully open in CLO3D and Marvelous Designer (2D patterns, seams, fabrics); Our own PNG fabric textures: kulit_hitam.png, denim_hitam.png, netral_halus.png; Preview images of the garment (front, back, side, three-quarter); READ-ME: the list of pattern pieces, fabrics and how to open the file; Step-by-step PDF guide (coming soon, sent once finished); Video tutorial on making the garment (coming soon); Requires CLO3D or Marvelous Designer (made with the 2025 release; use the same or a newer release).
The .zprj file opens in CLO3D and in Marvelous Designer (made with the 2025 release; use the same or a newer release). The 2D patterns, seams and fabrics are all open and editable. The patterns were built in Marvelous Designer from a millimetre-based pattern library, then the file was opened in CLO3D 2025.
No. Buttons, buckles and zippers are small sewn fabric pieces, and some yoke, quilting and pleat lines are internal style lines rather than separate pieces. You can replace them with real CLO3D trims yourself after opening the file.
Yes. The patterns are sized to the stock Luka avatar and are not graded, but every 2D pattern is open, so you can edit the pieces, swap fabrics and replace the textures, then simulate again. If you would like us to adapt the garment for you, message us on WhatsApp.
The project costs US$24. Use the "Buy via WhatsApp" button on this page; the project files are sent over WhatsApp after payment is confirmed.
Found a problem or have a suggestion for this project? Tell us on WhatsApp
Back to CLO3D portfolio