Memuat
Memuat
An emerald evening gown: a fitted sleeveless bodice, shoulder ruffles, an organza peplum and a three-tier gathered skirt.
0 views
A long evening gown for the Mia avatar. The fitted sleeveless bodice has ruffles at the armholes, the three-tier skirt widens downward so it gathers at every join, an organza peplum sits at the waist, a straight lining hangs inside, and a gold belt carries a bow with two tails at the back. The gathers are not drawn; they appear because a longer edge is sewn to a shorter one.


A one-piece front and a back are made from basic blocks sized to Mia with 24 mm of ease, a low neckline, narrow shoulders and sides tapering to the waist.
Each ruffle is a strip 1.6 times the armhole length; its top edge is sewn to the front and back armhole and its lower edge is left free.
Three rectangular tiers, front and back, 1.7, 2.7 and 4.2 times the waist width. The first tier is sewn to the bodice waist and each next tier to the lower edge of the previous one, so every join gathers.
A trapezoid organza peplum and a straight lining are sewn to internal lines near the top edge of the first tier.
Front and back belt pieces are sewn into a loop at the waist. Two bow tails are sewn to internal lines on the back belt, then the bow knot is patched on top.
Each piece is placed on an avatar arrangement point and given a layer number. The simulation runs in two phases: first without gravity so the seams close, then with normal gravity.
Fabrics
Emerald satin for the bodice, emerald taffeta for the skirt, light emerald organza for the peplum and ruffles, voile for the lining and gold satin for the belt and bow.
Avatar
The stock CLO female avatar (Mia). Pattern sizes are derived from the avatar body: bust 870 mm, waist 615 mm, hip 955 mm.
Note: The bow knot is a flat patch piece, not a truly tied bow, and the gown has no zipper or back opening. The patterns were built from a millimetre-based pattern library in Marvelous Designer, and the .zprj file was then opened in CLO3D 2025. Buttons, buckles and zippers are small sewn fabric pieces, not 3D trims. The avatar is a stock CLO avatar and the fabric textures are our own. The patterns are not graded and are not prepared for production. The images on this page are captures of the CLO3D 2025 3D window after opening the .zprj file (not final renders).
The Gaun_Pesta_Bertingkat.zprj file: fully open in CLO3D and Marvelous Designer (2D patterns, seams, fabrics); Our own PNG fabric textures: netral_halus.png; Preview images of the garment (front, back, side, three-quarter); READ-ME: the list of pattern pieces, fabrics and how to open the file; Step-by-step PDF guide (coming soon, sent once finished); Video tutorial on making the garment (coming soon); Requires CLO3D or Marvelous Designer (made with the 2025 release; use the same or a newer release).
The .zprj file opens in CLO3D and in Marvelous Designer (made with the 2025 release; use the same or a newer release). The 2D patterns, seams and fabrics are all open and editable. The patterns were built in Marvelous Designer from a millimetre-based pattern library, then the file was opened in CLO3D 2025.
No. Buttons, buckles and zippers are small sewn fabric pieces, and some yoke, quilting and pleat lines are internal style lines rather than separate pieces. You can replace them with real CLO3D trims yourself after opening the file.
Yes. The patterns are sized to the stock Mia avatar and are not graded, but every 2D pattern is open, so you can edit the pieces, swap fabrics and replace the textures, then simulate again. If you would like us to adapt the garment for you, message us on WhatsApp.
The project costs US$24. Use the "Buy via WhatsApp" button on this page; the project files are sent over WhatsApp after payment is confirmed.
Found a problem or have a suggestion for this project? Tell us on WhatsApp
Back to CLO3D portfolio