Memuat
Memuat
A blue kawung batik dress with balloon sleeves, an asymmetric A-line skirt, a gathered flounce and a bowed obi belt.
0 views
A modern batik dress for the Mia avatar. It has a fitted bodice with a neckband, short cuffed balloon sleeves, an A-line skirt longer on one side, a gathered flounce along the slanted hem, a dark blue satin obi with a bow and two tails at the front, and two patch pockets. The blue kawung motif is our own texture.


A one-piece front and a back are made from basic blocks sized to Mia with 40 mm of ease and sides tapering to the waist.
The sleeve cap is 1.32 times the armhole length and the sleeve end is wide, then sewn to a shorter cuff so the sleeve puffs.
A narrow three-segment band is sewn along the front and back neckline.
The front and back skirt pieces are trapezoids with a slanted hem, longer on one side. A flounce 1.55 times the hem length is sewn to that hem so it gathers.
Front and back obi pieces are sewn into a loop at the waist. Two bow tails are sewn to internal lines on the front obi, the bow knot is patched on top, and two pockets are patched on the front skirt.
Each piece is placed on an avatar arrangement point and given a layer number. The simulation runs in two phases: first without gravity so the seams close, then with normal gravity.
Fabrics
Blue kawung batik (our own texture) for the bodice, sleeves, skirt and pockets, and dark blue satin for the obi, bow, neckband, cuffs and flounce.
Avatar
The stock CLO female avatar (Mia). Pattern sizes are derived from the avatar body: bust 870 mm, waist 615 mm, hip 955 mm.
Note: The bow knot is a flat patch piece, not a truly tied bow, and the dress has no zipper or opening. The patterns were built from a millimetre-based pattern library in Marvelous Designer, and the .zprj file was then opened in CLO3D 2025. Buttons, buckles and zippers are small sewn fabric pieces, not 3D trims. The avatar is a stock CLO avatar and the fabric textures are our own. The patterns are not graded and are not prepared for production. The images on this page are captures of the CLO3D 2025 3D window after opening the .zprj file (not final renders).
The Dress_Batik_Ruffle.zprj file: fully open in CLO3D and Marvelous Designer (2D patterns, seams, fabrics); Our own PNG fabric textures: batik_kawung_biru.png, netral_halus.png; Preview images of the garment (front, back, side, three-quarter); READ-ME: the list of pattern pieces, fabrics and how to open the file; Step-by-step PDF guide (coming soon, sent once finished); Video tutorial on making the garment (coming soon); Requires CLO3D or Marvelous Designer (made with the 2025 release; use the same or a newer release).
The .zprj file opens in CLO3D and in Marvelous Designer (made with the 2025 release; use the same or a newer release). The 2D patterns, seams and fabrics are all open and editable. The patterns were built in Marvelous Designer from a millimetre-based pattern library, then the file was opened in CLO3D 2025.
No. Buttons, buckles and zippers are small sewn fabric pieces, and some yoke, quilting and pleat lines are internal style lines rather than separate pieces. You can replace them with real CLO3D trims yourself after opening the file.
Yes. The patterns are sized to the stock Mia avatar and are not graded, but every 2D pattern is open, so you can edit the pieces, swap fabrics and replace the textures, then simulate again. If you would like us to adapt the garment for you, message us on WhatsApp.
The project costs US$17. Use the "Buy via WhatsApp" button on this page; the project files are sent over WhatsApp after payment is confirmed.
Found a problem or have a suggestion for this project? Tell us on WhatsApp
Back to CLO3D portfolio