Memuat
Memuat
A brocade kutubaru kebaya with a centre bef panel, a kemben and a pleated kawung batik skirt.
1 views
A kutubaru kebaya for the Mia avatar: a fitted body with pointed front tips, a bef (kutubaru) panel joining the two fronts, a continuous neckband running from the left front to the right front, and slim long sleeves. Under it is a satin kemben, and below a sogan kawung batik skirt with a waistband and wiru pleats. The kawung motif is our own texture.


Two rectangles are sewn at the sides into a kemben wrapping the bust, placed on the innermost layer.
The skirt is made from a front and a back piece tapering to the waist, given a two-piece waistband, then a wiru panel with four pleat lines as internal lines is patched on the front.
Two V-neck fronts with pointed lower tips, a back and two slim sleeves are made from basic blocks sized to Mia with little ease and a reduced waist.
The rectangular bef is sewn to the centre edges of the right and left fronts, joining the two sides of the kebaya at the chest.
A three-segment neckband is sewn continuously from the left front, around the back neck, to the right front. Four buttons are patched onto the bef as small fabric pieces.
Each piece is placed on an avatar arrangement point and given a layer number. The simulation runs in two phases: first without gravity so the seams close, then with normal gravity.
Fabrics
Pink brocade (the stock Lace preset) for the kebaya, pink satin for the kemben, bef and neckband, sogan kawung batik (our own texture) for the skirt and gold satin for the buttons.
Avatar
The stock CLO female avatar (Mia). Pattern sizes are derived from the avatar body: bust 870 mm, waist 615 mm, hip 955 mm.
Note: The brocade uses the stock lace preset, not a custom brocade motif. The wiru is a patch piece with internal lines, and the skirt is made from two sewn pieces, not one wrapped cloth. The patterns were built from a millimetre-based pattern library in Marvelous Designer, and the .zprj file was then opened in CLO3D 2025. Buttons, buckles and zippers are small sewn fabric pieces, not 3D trims. The avatar is a stock CLO avatar and the fabric textures are our own. The patterns are not graded and are not prepared for production. The images on this page are captures of the CLO3D 2025 3D window after opening the .zprj file (not final renders).
The Kebaya_Kutubaru_Batik.zprj file: fully open in CLO3D and Marvelous Designer (2D patterns, seams, fabrics); Our own PNG fabric textures: batik_kawung_sogan.png, netral_halus.png; Preview images of the garment (front, back, side, three-quarter); READ-ME: the list of pattern pieces, fabrics and how to open the file; Step-by-step PDF guide (sent with the package; also part of the video class); Video tutorial in the CLO3D Complex Garments class (this project's episode; episode 1 is free); Requires CLO3D or Marvelous Designer (made with the 2025 release; use the same or a newer release).
The .zprj file opens in CLO3D and in Marvelous Designer (made with the 2025 release; use the same or a newer release). The 2D patterns, seams and fabrics are all open and editable. The patterns were built in Marvelous Designer from a millimetre-based pattern library, then the file was opened in CLO3D 2025.
No. Buttons, buckles and zippers are small sewn fabric pieces, and some yoke, quilting and pleat lines are internal style lines rather than separate pieces. You can replace them with real CLO3D trims yourself after opening the file.
Yes. The patterns are sized to the stock Mia avatar and are not graded, but every 2D pattern is open, so you can edit the pieces, swap fabrics and replace the textures, then simulate again. If you would like us to adapt the garment for you, message us on WhatsApp.
The project costs US$24. Use the "Buy via WhatsApp" button on this page; the project files are sent over WhatsApp after payment is confirmed.
Found a problem or have a suggestion for this project? Tell us on WhatsApp
Back to CLO3D portfolio