Memuat
Memuat
A women's jumpsuit: a shirt-collar bodice and wide-leg trousers joined by a waistband that creates gathers.
0 views
A utility jumpsuit for the Mia avatar in terracotta canvas. The bodice has a shirt collar, short cuffed sleeves and flap chest pockets; the wide-leg trousers have cargo pockets and back pockets. Bodice and trousers are joined by a waistband shorter than both, so the waist gathers without elastic. The waistband, pocket flaps and collar fall use dark brown twill as an accent.


Two fronts with a 14 mm extension, a back and two short sleeves are made from basic blocks sized to Mia with 110 mm of ease; cuffs are sewn to the sleeve ends.
A three-segment collar stand is sewn to the neckline, then the collar fall is sewn to its top edge.
Four-piece trousers with 110 mm of ease and a 270 to 285 mm leg opening are sewn at the side, inseam and crotch.
Front and back waistbands are cut shorter than the bodice hem and the trouser waist, then sewn to both so the fabric gathers at the waist.
Chest and cargo pockets with their flaps are patched on with the top edge open; two back pockets are patched on the back trouser pieces.
Each piece is placed on an avatar arrangement point and given a layer number. The simulation runs in two phases: first without gravity so the seams close, then with normal gravity.
Fabrics
Terracotta canvas for the bodice and trousers, and dark brown twill for the waistband, pocket flaps and collar fall.
Avatar
The stock CLO female avatar (Mia). Pattern sizes are derived from the avatar body: bust 870 mm, waist 615 mm, hip 955 mm.
Note: This jumpsuit has no buttons or zipper, and the cargo pockets are patched flat (no volume). The patterns were built from a millimetre-based pattern library in Marvelous Designer, and the .zprj file was then opened in CLO3D 2025. Buttons, buckles and zippers are small sewn fabric pieces, not 3D trims. The avatar is a stock CLO avatar and the fabric textures are our own. The patterns are not graded and are not prepared for production. The images on this page are captures of the CLO3D 2025 3D window after opening the .zprj file (not final renders).
The Jumpsuit_Utilitas.zprj file: fully open in CLO3D and Marvelous Designer (2D patterns, seams, fabrics); Our own PNG fabric textures: netral.png, netral_kepar.png; Preview images of the garment (front, back, side, three-quarter); READ-ME: the list of pattern pieces, fabrics and how to open the file; Step-by-step PDF guide (coming soon, sent once finished); Video tutorial on making the garment (coming soon); Requires CLO3D or Marvelous Designer (made with the 2025 release; use the same or a newer release).
The .zprj file opens in CLO3D and in Marvelous Designer (made with the 2025 release; use the same or a newer release). The 2D patterns, seams and fabrics are all open and editable. The patterns were built in Marvelous Designer from a millimetre-based pattern library, then the file was opened in CLO3D 2025.
No. Buttons, buckles and zippers are small sewn fabric pieces, and some yoke, quilting and pleat lines are internal style lines rather than separate pieces. You can replace them with real CLO3D trims yourself after opening the file.
Yes. The patterns are sized to the stock Mia avatar and are not graded, but every 2D pattern is open, so you can edit the pieces, swap fabrics and replace the textures, then simulate again. If you would like us to adapt the garment for you, message us on WhatsApp.
The project costs US$17. Use the "Buy via WhatsApp" button on this page; the project files are sent over WhatsApp after payment is confirmed.
Found a problem or have a suggestion for this project? Tell us on WhatsApp
Back to CLO3D portfolio