Memuat
Memuat
A women's trench coat with a double-breasted overlap, two-piece collar, storm flaps, epaulettes and a buckled belt.
0 views
A knee-length trench coat for the Mia avatar in khaki gabardine. Two fronts with wide extensions overlap at the centre, the collar has a stand and a fall, the back carries a storm flap and the right chest a gun flap. The details are complete: epaulettes, slanted pocket flaps, sleeve straps, six buttons and a belt with a buckle. It is a good project for learning how to stack many layered patch pieces on one body.


Two fronts with a 95 mm extension, one back and two sleeves are made from basic blocks sized to the Mia avatar with 150 mm of bust ease; the armhole and sleeve cap are computed from the same line lengths.
The right front edge is sewn to an internal line drawn on the left front, so the two sides overlap by the width of the extension without needing working buttons.
The collar stand is split into three segments matching the left front, back and right front neckline lengths; a curved collar fall is sewn to the top edge of the stand.
The flap on the back and the flap on the right chest are patch pieces sewn only along part of their edges, so the lower edge hangs free and follows the body.
Slanted epaulettes on the shoulders, slanted pocket flaps at the hips, straps at the sleeve ends and six buttons are added as small fabric pieces on higher layers.
Front and back belt pieces are sewn into a loop at the waist on their own layer, then a buckle is patched onto the front belt.
Each piece is placed on an avatar arrangement point and given a layer number. The simulation runs in two phases: first without gravity so the seams close, then with normal gravity.
Fabrics
Khaki gabardine (the stock Twill preset with our own twill texture), dark brown buttons and a metal-coloured buckle.
Avatar
The stock CLO female avatar (Mia). Pattern sizes are derived from the avatar body: bust 870 mm, waist 615 mm, hip 955 mm.
Note: The six buttons and the buckle are decorative fabric pieces only; the front opening is held by the seam to the internal line. The patterns were built from a millimetre-based pattern library in Marvelous Designer, and the .zprj file was then opened in CLO3D 2025. Buttons, buckles and zippers are small sewn fabric pieces, not 3D trims. The avatar is a stock CLO avatar and the fabric textures are our own. The patterns are not graded and are not prepared for production. The images on this page are captures of the CLO3D 2025 3D window after opening the .zprj file (not final renders).
The Trench_Coat_Double_Breasted.zprj file: fully open in CLO3D and Marvelous Designer (2D patterns, seams, fabrics); Our own PNG fabric textures: netral_kepar.png, netral_halus.png; Preview images of the garment (front, back, side, three-quarter); READ-ME: the list of pattern pieces, fabrics and how to open the file; Step-by-step PDF guide (coming soon, sent once finished); Video tutorial on making the garment (coming soon); Requires CLO3D or Marvelous Designer (made with the 2025 release; use the same or a newer release).
The .zprj file opens in CLO3D and in Marvelous Designer (made with the 2025 release; use the same or a newer release). The 2D patterns, seams and fabrics are all open and editable. The patterns were built in Marvelous Designer from a millimetre-based pattern library, then the file was opened in CLO3D 2025.
No. Buttons, buckles and zippers are small sewn fabric pieces, and some yoke, quilting and pleat lines are internal style lines rather than separate pieces. You can replace them with real CLO3D trims yourself after opening the file.
Yes. The patterns are sized to the stock Mia avatar and are not graded, but every 2D pattern is open, so you can edit the pieces, swap fabrics and replace the textures, then simulate again. If you would like us to adapt the garment for you, message us on WhatsApp.
The project costs US$24. Use the "Buy via WhatsApp" button on this page; the project files are sent over WhatsApp after payment is confirmed.
Found a problem or have a suggestion for this project? Tell us on WhatsApp
Back to CLO3D portfolio